Brian Candler wrote:
> Mike Vastola wrote:
>> DisplayUpdater::update_display('127.0.0.1', 23, '--')
> 
> You're really running an SSL server on the telnet port on your local 
> computer?

Haha. No. I change the port/hostname to mask what it really was.

> 
>> I can
>> connect to it flawlessly from the same computer that's running ruby with
>> openssl s_client.
> 
> Can you show the full command line you use for openssl s_client ? And 
> the certificate validation result when you run it?
> 

openssl s_client -connect {non-localhost-host}:{non-telnet-port} -cert 
cert.pem -key key.pem -CAfile cacert.pem

CONNECTED(00000003)
depth=1 {INSERT_CA_SUBJECT_HERE}
verify return:1
depth=0 {INSERT_SERVER_SUBJECT_HERE}
verify return:1
---
Certificate chain
 0 s: {INSERT_SERVER_SUBJECT_HERE}
   i: {INSERT_CA_SUBJECT_HERE}
 1 s: {INSERT_CA_SUBJECT_HERE}
   i: {INSERT_CA_SUBJECT_HERE}
---
Server certificate
-----BEGIN CERTIFICATE-----
{INSERT_CERTIFICATE_HERE}
-----END CERTIFICATE-----
subject= {INSERT_SERVER_SUBJECT_HERE}
issuer= {INSERT_CA_SUBJECT_HERE}
---
Acceptable client certificate CA names
{INSERT_CA_SUBJECT_HERE}
---
SSL handshake has read 4252 bytes and written 5147 bytes
---
New, TLSv1/SSLv3, Cipher is AES256-SHA
Server public key is 4096 bit
Compression: NONE
Expansion: NONE
SSL-Session:
    Protocol  : TLSv1
    Cipher    : AES256-SHA
    Session-ID: 
1BE2DD87165574CD6F2D99720007FDCA811C63546FB449A72B0293C54177A5E5
    Session-ID-ctx:
    Master-Key: 
BCCAE579F3AF185BDAFF1D30D6F058573EC8266DE2877CE73E30ED7ED2BE819DD15B7098304F59529BAF6BE12FD18EED
    Key-Arg   : None
    Start Time: 1284991918
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
---
%%% Starting Here Is the actual Custom Protocol Communications %%%
--
OK
*** Setting display 00 to value '--' via /dev/ttyUSB0.
DONE
%%% End Custom Protocol Communications %%%
closed

> Also, have you tried:
> sslSock.write(data + "\r\n")

No.. will try though..
-- 
Posted via http://www.ruby-forum.com/.