With the extra credits, this problem is a little involved and some people did
write a lot of code for it.  Building the tree was our main interest in this
problem though.

The quiz didn't detail that process too much, but several submitters found
write-ups like the one at Wikipedia.  The trick is generally to use two queues. 
The first starts with all of the letters queued lowest frequency to the highest
and the second starts empty.  While there is more than one node in the combined
queues, you dequeue the two with the lowest weights, build a new node with them
as children and a combined weight, then enqueue that in the second queue.  When
you get down to just one node, you are finished.  That single node is the root
of the tree.

A variation on this strategy is to use a single priority queue.  When working
this way you can always just pull the two lowest entries, since the queue will
keep them coming in the proper order.

Drew Olson has some pretty easy to follow code using the priority queue
approach, so let's look into that now.  First, Drew had to build a priority
queue since one doesn't ship with Ruby:

	# priority queue for nodes
	class NodeQueue
	  def initialize
	    @queue = []
	  end
	
	  def enqueue node
	    @queue << node
	    @queue = @queue.sort_by{|x|[-x.weight,x.val.size]}
	  end
	
	  def dequeue
	    @queue.pop
	  end
	
	  def size
	    @queue.size
	  end
	end

This is a trivial implementation that just resorts the queue after each new
entry.  Note that the sort is on the opposite of the weights to put the lowest
entries at the front.

This is not ideal, of course, but likely to be reasonably quick if you are just
encoding simple text.  That's because the sort is largely in C.  For a better
priority queue, have a peek at Daniel Martin's code.

Drew also used a trivial class to represent nodes in the tree:

	# class to hold nodes in the huffman tree
	class Node
	  attr_accessor :val,:weight,:left,:right
	
	  def initialize(val="",weight=0)
	    @val,@weight = val,weight
	  end
	
	  def children?
	    return @left || @right
	  end
	end

As you can see, Nodes are pretty much just a Struct for tracking value, weight,
and children.  The additional method just checks to see if this node is a
branch, meaning that it has at least one child node.

With those tools to build on, Drew is now ready to create a HuffmanTree:

	# HuffmanTree represents the tree with which we perform
	# the encoding
	class HuffmanTree
	
	  # initialize the tree based on data
	  def initialize data
	    @freqs = build_frequencies(data)
	    @root = build_tree
	  end
	
	  #encode the given data
	  def encode data
	    data.downcase.split(//).inject("") do |code,char|
	      code + encode_char(char)
	    end
	  end
	
	  def decode data
	    node = @root
	
	    if !@root.children?
	      return @root.val
	    end
	
	    data.split(//).inject("") do |phrase,digit|
	      if digit == "0"
	        node = node.left
	      else
	        node = node.right
	      end
	      if !node.children?
	        phrase += node.val
	        node = @root
	      end
	      phrase
	    end
	  end
	  
	  # ...

These three methods define the external interface for this class.  First, you
create HuffmanTree objects by passing in the data a tree should be constructed
from.  Frequencies are counted for the characters in the data and a tree is
built from those counts.

The encode() method takes the data you wish to apply the encoding to and returns
a String of ones and zeros representing the data.  This implementation just
iterates over the characters, using a helper method to translate them.  Note
that Drew's implementation normalizes case which results in smaller encodings,
but this step needs to be removed if you want lossless compression.

The decode method is the most complex in the set, but still not too hard to
grasp.  It starts at the root node and iterates over each one and zero,
selecting the correct child node.  Each time it reaches a leaf node (no
children), that character value is added to the translation and the search
resets to the root node.

Now we just need to see the helper methods used in those methods.  This first
one is the reverse of the decoder we just examined:

	  # ...
	  
	  private
	
	  # this method encodes a given character based on our
	  # tree representation
	  def encode_char char
	    node = @root
	    coding = ""
	
	    # encode to 0 if only one character
	    if !@root.children?
	      return "0"
	    end
	
	    # we do a binary search, building the representation
	    # of the character based on which branch we follow
	    while node.val != char
	      if node.right.val.include? char
	        node = node.right
	        coding += "1"
	      else
	        node = node.left
	        coding += "0"
	      end
	    end
	    coding
	  end
	  
	  # ...

Again, the search begins with the root node and advances down the tree branches.
This time the search is for nodes containing the character and we can stop as
soon as we reach a leaf.  The encoding is the path of one and zero branches that
lead to the character.

These last two methods handle tree construction:

	  # ...
	  
	  # get word frequencies in a given phrase
	  def build_frequencies phrase
	    phrase.downcase.split(//).inject(Hash.new(0)) do |hash,item|
	      hash[item] += 1
	      hash
	    end
	  end
	
	  # build huffmantree using the priority queue method
	  def build_tree
	    queue = NodeQueue.new
	
	    # build a node for each character and place in pqueue
	    @freqs.keys.each do |char|
	      queue.enqueue(Node.new(char,@freqs[char]))
	    end
	
	    while !queue.size.zero?
	
	      # if only one node exists, it is the root. return it
	      return queue.dequeue if queue.size == 1
	
	      # dequeue two lightest nodes, create parent,
	      # add children and enqueue newly created node
	      node = Node.new
	      node.right = queue.dequeue
	      node.left = queue.dequeue
	      node.val = node.left.val+node.right.val
	      node.weight = node.left.weight+node.right.weight
	      queue.enqueue node
	    end
	  end
	end

The first method, build_frequencies(), is just a character counter.  The counts
are returned in a Hash keyed by the character for a given count.

The main work is done in build_tree().  It begins by creating a priority queue
and queuing each of the characters from the frequency count.  After that, the
while loop is a direct translation of the process I described at the beginning
of this summary.

The final bit of code puts the tree to work creating Drew's solution:

	# get command lines args, build tree and encode data
	if __FILE__ == $0
	  require 'enumerator'

	  data = ARGV.join(" ")
	  tree = HuffmanTree.new data

	  # get encoded data and split into bits
	  code = tree.encode(data)
	  encoded_bits = code.scan(/\d{1,8}/)

	  # output
	  puts
	  puts "Original"
	  puts data
	  puts "#{data.size} bytes"
	  puts
	  puts "Encoded"
	  encoded_bits.each_slice(5) do |slice|
	    puts slice.join(" ")
	  end
	  puts "#{encoded_bits.size} bytes"
	  puts
	  puts "%d percent compression" %
	       (100.0 - (encoded_bits.size.to_f/data.size.to_f)*100.0)
	  puts
	  puts "Decoded"
	  puts tree.decode(code)
	end

The first few chunks of this code just run the interface methods we have been
examining.  The last big chunk is simply the output of results using some
straightforward printing logic.

My thanks to all who took on this challenge.  Several of you wrote library
quality solutions.  It was impressive to see.

Tomorrow we will try some magical math, as quick as we can...